CH 116

CH 116

Chemitac 116 is a heat reactive adhesive used with primer Chemitac 11, for bonding elastomers as NR, SBR, BR, CR, NBR, HNBR, IIR, CIIR, BIIR, CSM and EPDM with steel, aluminum and other rigid substrate.

Chemitac 116 is a heavy metals and chlorinated solvent free product.

Chemitac 116 presents better performance over pre-bake conditions and could be used as one coat adhesive, depending on the rubber formulations and cure system. Chemitac 116 is recommended to be used like a “Post-Vulcanization” bonding. For this adhesion process, is important to have a pressure over vulcanized rubber to increase the contact between rubber and substrate. The rubber deformation must be from 5% to 10% over pressure during curing, until the part presenting room temperature. Process oils used in rubber formulation can be applied to help the part assembly.

TYPICAL PHYSICAL CHARACTERISTICS

CHEMICAL COMPOSITION

Polymers and fillers stabilized in aromatic solvents.

Related products

CH 06

Chemitac 6 is a heat reactive adhesive for bonding elastomers as AEM (VAMAC) and FKM with steel, aluminum, aramid, textile fibers and glass by vulcanization process.

open »

CH 153

Chemitac 153 is a heat reactive adhesive used with primer Chemitac 11, for bonding elastomers as NR, SBR, BR, CR, NBR, HNBR, IIR, CIIR, BIIR, CSM and EPDM with steel, aluminum and aramid by vulcanization process.

open »

CH A400 + CH H400

Chemitac A400 is a two-components base on polychloroprene rubber, room temperature adhesive that, when catalyzed with the appropriate amount of Chemitac H400, yields high strength adhesions. Chemitac A400 is used to bond natural rubber, neoprene rubber, SBR, EPDM…

open »

CH 94

Chemitac 94 is a heat reactive adhesive for bonding elastomers as NBR, ACM and solid PU with steel, aluminum, aramid, textile fibers and glass by vulcanization process.

open »

Similar color

CH 141

Chemitac 141 is a heat reactive adhesive used with primer Chemitac 11, for bonding elastomers as NR, SBR, BR, CR, NBR, HNBR, IIR, CIIR, BIIR, CSM and EPDM with steel, aluminum and aramid by vulcanization process.

Abrir »

CH 42

Chemitac 42 is a heat reactive adhesive used with the primer Chemitac 11, for bonding elastomers as NR, SBR, BR, CR, NBR, HNBR, IIR, CIIR, BIIR, CSM and EPDM with steel, aluminum, aramid, textile fibers and glass by vulcanization process.

Abrir »

CH 12

Chemitac 12 is a heat reactive adhesive used with the primer Chemitac 11, for bonding elastomers as NR, SBR, BR, CR, NBR, HNBR, IIR, CIIR, BIIR, CSM and EPDM with steel, aluminum, aramid, textile fibers and glass by vulcanization process.

Abrir »

CH 153

Chemitac 153 is a heat reactive adhesive used with primer Chemitac 11, for bonding elastomers as NR, SBR, BR, CR, NBR, HNBR, IIR, CIIR, BIIR, CSM and EPDM with steel, aluminum and aramid by vulcanization process.

Abrir »